Our Blog


SMO

SMO | Social Media Optimization (SMO) is the practice of social media action with the intention of drawing distinctive guests to web site material. SMO is one of two on-line strategies of web site optimization; the other methodology is SEO or Search Engine Optimization. There are two classes of SMO strategies: Social media characteristics added to…

SMO

sem

SEM

SEM, which stands for Search Engine Marketing, is the method of optimizing one's web site to enhance the place through which the web site will seem throughout the search outcomes obtained from a search engine based mostly on particular key phrase phrases. To function as an enterprise right now with out the good thing about…


ROM

ROM

ROM - Read-only memory (ROM) is a category of storage medium utilized in computer systems and different electronic gadgets. Data saved in ROM can solely be modified slowly, arduously, or in many cases not possible, so it's primarily utilized to distribute firmware (software that is included with particular hardware, and not likely to require numerous upgrades).…


RAM

RAM or Random Access Memory is a form of computer data storage that is temporarily used to hold the instructions or code that makes up the computers operating system. Ram is only active while the computer is powered on. Once you shut the system down everything that was stored in the RAM is gone forever.…

RAM

raid level 0+1

RAID Level 0+1

RAID Level 0+1 - (Requires at Minimum 4 Disks; the number of drives must be even - Data Redundancy is Achieved Through Mirroring) Array Architecture: Striped Sets in Mirrored Configuration: In this scenario, a second striped data set is created to mirror the first striped data set. In opposition to the 1+0 RAID array setup,…


RAID Level 1+0

RAID Level 1+0 - (2 Drive Minimum (though 4 are more commonly used) - Redundancy Through Mirroring) Mirrored Sets in a Striped Set: Fault tolerance and increased performance. This RAID level is a combination of RAID 1 (mirroring) and RAID 0 (striping). RAID 1+0 can sustain multiple drive failures as long as no mirror loses…

raid 1+0

raid level 6

RAID Level 6

RAID Level 6 - (4 Drive Minimum - Redundancy Through Parity) Block-Level Striping with Double Distributed Parity: Very similar to RAID 5, RAID 6 builds on the security of RAID 5 by adding an additional level of redundancy. In a RAID 6 up to two drives can fail and no data will be lost. RAID…


RAID Level 5

RAID Level 5 – (3 Drive Minimum - Redundancy Through Parity) Block-Level Striping with Distributed Parity: RAID 5 combines the increased speed of striping with redundancy through distributed parity. In RAID 5 one drive out of the array will always be sacrificed to achieve redundancy. In other words, when there are three 100 gigabyte drives…

RAID Level 5

RAID Level 1

RAID Level 1

RAID Level 1 – (2 Drive Minimum – Data Redundancy) Mirroring: In its simplest form RAID Level 1 simply duplicates data onto two different hard drives simultaneously, thereby providing data redundancy. Data redundancy means that if either of the two hard drives fails for any reason no data will be lost as there is an…